Totalization; Add Up "Number Of Parts - KERN CXB 3K0.2 Operating Instruction

10 Totalization

The balance is equipped with a summation memory used for adding up of identical
counted parts to total quantity and total weight.

10.1 Add up "Number of parts"

Select reference weight and place number of parts for first weighing.
118. 3 ��
a
PRE-
TARE
The display value is added to the summation memory by pressing the
-----��
a
PRE-
TARE
The [ ] display next to "M+" indicates the stored value. After dead stop control was carried
out the balance will return automatically to counting mode.
118. 3 ��
a
PRE-
TARE
118. 3 ��
a
PRE-
TARE
Place number of parts for second weighing and add to memory.
Add and weigh more parts if needed as described above. Please note that the balance must
be unloaded between the individual weighing procedures.
This process can be repeated 99 times or until the weighing range of the balance is
exhausted.
Display of you saved weighing data:
With balance unloaded, press the
Total weight, number of weighing procedures as well as total parts counting appear 3 sec.
118. 3 ��
a
PRE-
TARE
Total weight placed on
balance
36
1. 1 833�
ADD� -----��
1�
1. 1 833�
button:
1�
Number weighing processes
100��
M+

key.
M+
 100��
M+

 100��
M+

 100��
M+

Total parts counting placed
on balance
CXB-BA-e-1723