Totalization - KERN HFT 3T0.5 Operating Manual

5.9 Totalization

With this function the individual weighing values are added into the summation
memory by pressing
Prerequisite: Totalizing function „F11 ACC" on setting „on", see chap. 6.2.
• With active totalizing function the indicator „M+" is displayed
• The totalizing function is not active when the weight is under 20d.
• Totalizing is only possible in weighing mode.
• The data output depends on the menu setting „F7 Prt".
• When switching-over to another weighing unit the summation memory will
be deleted.

Hook-on the item to be weighed A.
Wait until the stability display "
„n001" followed by the weight value will be displayed. The weight is added to the
summation memory and printed if an optional printer is connected, depending on
the menu setting „F7 Prt".
Printout example YKB-01N (menu setting „F7 PrtPrt 5"):
28
and edited, when an optional printer is connected.
" appears, then press
STABLE

No. 1
N : 100.0KG
C 100.0KG
.
HFT-BA-e-1812