Table of Contents
Advertisement
11.5
Removing the fork protector
11.6
Installing the fork protector
11.7
Removing the fork legs
SERVICE WORK ON THE CHASSIS 11
–
Remove screws
–
Remove screws
protector.
–
Remove screws
fork protector.
V02140-11
–
Position the fork protector on the left fork leg. Mount and
tighten screws
Guideline
Remaining screws,
chassis
–
Position the brake line and clamp. Mount and tighten
2
screws
.
–
Position the fork protector on the right fork leg. Mount and
V02140-10
tighten screws
Guideline
Remaining screws,
chassis
Preparatory work
–
Raise the motorcycle with a lift stand. (
–
Remove the front wheel.
Main work
–
Remove screws
–
Remove screws
–
Allow the brake caliper and brake line to hang loosely to the
side.
Info
Do not actuate the hand brake lever when the front
wheel is removed.
V02141-10
1
on the left fork leg. Take off the clamp.
2
on the left fork leg. Take off the left fork
3
on the right fork leg. Take off the right
1
.
M6
10 Nm (7.4 lbf ft)
3
.
M6
10 Nm (7.4 lbf ft)
p. 49)
(
p. 92)
1
and take off the clamp.
2
and take off the brake caliper.
51
Advertisement
Table of Contents
