7 PREPARING FOR USE
7.7
26
M01274-01
600868-01
Preparing the vehicle for riding on wet and muddy circuits
M01274-01
Warning
Danger of scalding During motorcycle
operation, the coolant gets very hot and is
under pressure.
–
Do not open the radiator, the radiator
hoses or other cooling system compo-
nents if the engine or the cooling system
are at operating temperature.
–
Allow the cooling system and the engine
to cool down before you open the radiator,
the radiator hoses or other components of
the cooling system.
–
In the event of scalding, rinse the area
affected immediately with lukewarm water.
–
Change the radiator cap.
–
Mount the air filter rain cover.
Air filter rain cover (79006921000)
Info
Observe the fitting instructions for Husqvarna Motor-
cycles accessories.
–
Clean the chain.
Chain cleaner (
p. 141)
–
Mount the steel sprocket.
–
Grease the chain.
Universal oil spray (
p. 142)
–
Clean the radiator fins.
–
Straighten the bent radiator fins carefully.
Condition
Regular use in sand
–
Change the piston every 10 operating hours.
–
Mount the air filter rain cover.
Air filter rain cover (79006921000)
Info
Observe the fitting instructions for Husqvarna Motor-
cycles accessories.