Table of Contents
Advertisement
11 SERVICE WORK ON THE CHASSIS
11.38
74
Checking the chain, rear sprocket, engine sprocket, and chain guide
400227-01
400987-10
Preparatory work
–
Raise the motorcycle with a lift stand. (
Main work
–
Shift the transmission into neutral.
–
Check the chain, rear sprocket and engine sprocket for wear.
»
If the chain, rear sprocket or engine sprocket is worn:
–
Change the drivetrain kit.
Info
The engine sprocket, rear sprocket and chain
should always be replaced together.
–
Pull on the top section of the chain with the specified
A
weight
.
Guideline
Weight, chain wear mea-
surement
–
B
Measure distance
of 18 chain rollers in the lower chain
section.
Info
Chain wear is not always even, so you should repeat
this measurement at different chain positions.
B
Maximum distance
18 chain rollers at the
longest chain section
»
B
If distance
is greater than the specified measurement:
–
Change the drivetrain kit.
Info
When a new chain is mounted, the rear
sprocket and the engine sprocket should also
be changed.
New chains wear out faster on an old, worn
rear sprocket or engine sprocket.
p. 49)
10 ... 15 kg (22 ... 33 lb.)
272 mm (10.71 in)
from
Advertisement
Table of Contents
