Checking The Frame; Checking The Link Fork; Checking The Throttle Cable Routing - Husqvarna TX 300i 2022 Owner's Manual

11 SERVICE WORK ON THE CHASSIS
11.39
11.40
11.41
76
M01368-01

Checking the frame

K01114-01

Checking the link fork

K01115-01

Checking the throttle cable routing

Warning
Danger of accidents The throttle cable may slip out of the guide if routed incorrectly.
The throttle slide will then no longer be closed and the speed can no longer be controlled.
–
Make sure that the throttle cable routing and the play in throttle cable complies with the specifica-
tion.
–
Check that the chain guide is firmly seated.
» If the chain guide is loose:
–
Tighten the fitting on the chain guide.
Guideline
Screw, chain
guide on link
fork at the
rear
Screw, chain
guide on link
fork at the
front
Finishing work
–
Remove the motorcycle from the lift stand. (
–
Check the frame for damage, cracks, and deformation.
» If the frame shows signs of damage, cracks, or deforma-
tion:
–
Change the frame.
Guideline
Repairs on the frame are not permitted.
–
Check the link fork for damage, cracks, and deformation.
» If the link fork shows signs of damage, cracks, or defor-
mation:
–
Change the link fork.
Guideline
Repairs on the link fork are not permitted.
Preparatory work
–
Remove the air filter box cover. (
–
Remove the seat. ( p. 62)
M6x19 10 Nm (7.4 lbf ft)
Loctite
M6x45 10 Nm (7.4 lbf ft)
p. 49)
p. 63)
®
243™