Table of Contents
Advertisement
9 SERVICE SCHEDULE
Check that the throttle cables are undamaged, routed without kinks, and set correctly.
Clean the air filter and air filter box.
Change the glass fiber yarn filling of the main silencer.
Service the fork.
Perform the shock absorber service.
Check the tightness of the easily accessible, safety-relevant screws and nuts.
Change the fuel screen.
Check the fuel pressure.
Check the idle speed.
Final check: Check the vehicle for operating safety and take a test ride.
Read out the fault memory after the test ride using the Husqvarna Motorcycles diag-
nostics tool.
Make a service entry in Husqvarna Motorcycles Dealer.net.
○
One-time interval
●
Periodic interval
9.3
Change the front brake fluid.
Change the rear brake fluid.
Change the hydraulic clutch fluid.
Lubricate the steering head bearing.
Clean the pressure sensor hose.
Service the fork.
Perform the shock absorber service.
Check the electric starter drive.
Change the fuel filter.
Check the reed valve housing, reed valve and intake flange.
Change the oil pump; clean the oil screen.
Clean the oil screen in the oil tank.
Clean the protection cap of the pressure sensor.
Change the coolant.
Perform minor engine service. (Check the exhaust control for functioning and
smooth operation. Check the clutch.)
36
(
(
p. 115)
Recommended work
After 20 operating hours / Every 20 operating hours
After 10 operating hours / Every 10 operating hours
(
(
p. 108)
p. 64)
(
p. 66)
p. 79)
(
p. 57)
Every 40 operating hours
Every 20 operating hours
Every 10 operating hours
After 5 operating hours
After 1 operating hour
○
○
○
○
○
○
○
○
○
○
every 48 months
every 12 months
Every 80 operating hours
Every 40 operating hours
●
○
○
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●
Advertisement
Table of Contents
