Removing The Start Number Plate; Installing The Start Number Plate; Removing Front Fender - Husqvarna TX 300i 2022 Owner's Manual

11 SERVICE WORK ON THE CHASSIS
11.14
11.15
11.16
58

Removing the start number plate

K01332-10

Installing the start number plate

K01331-10

Removing front fender

K01078-10
–
1
Remove screw .
–
2
Remove screw and take off the brake line guide and start
number plate.
–
Position the brake line and brake line guide on the start num-
ber plate.
–
Mount and tighten screw
–
Position the start number plate.
The holding lugs engage in the fender.
–
Mount and tighten screw
Preparatory work
–
Remove the start number plate. (
Main work
–
1
Remove screws and
1
.
2
.
p. 58)
2
. Remove front fender.