Removing And Installing Front Seat Heating Switches; Removing And Installing Rear Seat Heating Switches - Audi 2003 A8 Workshop Manual

5.3 Removing and installing front seat heat‐
ing switches
The front seat heating switches are integrated into the Climatronic
control unit - J255- (may also be referred to as "front operating
and display unit") and cannot be renewed individually.
5.4 Removing and installing rear seat heat‐
ing switches
Front seat heating switches are only integrated into rear Clima‐
tronic operating and display unit - E265- on vehicles with air
conditioner (rear) and cannot be renewed individually.
Removing
– Switch off ignition and take out ignition key.
– Take out rear ashtray.
– Unscrew bolts -arrows- and detach mounting frame with vents.
– Unplug electrical connectors.
– Detach trim -3- from mounting frame -arrows-.
– Unclip switches -1- and -2- from switch mounting.
Installing
Install in reverse order.
Tightening torque
Component
Air vents to centre console (rear)
Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by AUDI AG.
Nm
2.5
Audi A8 2003 ➤
Electrical system - Edition 08.2014
5. Lights and switches in centre console
289