Replacing A Label Roll - Dymo LabelWriter SE300 User Manual

10. Close the cover and your LabelWriter printer is ready to print
labels.

Replacing a Label Roll

To replace an empty roll, or switch between different labels,
follow these instructions:
1. Tear off any labels that have been fed through the printer.
2. Open the cover
3. As you lift the platen release lever, pull the label out of the
platen mechanism. (See Figure 1-6 below)
Figure 1-6. Push the platen release lever up as you pull the label
back from the mechanism.
Figure 1-5. Labels loaded, ready to print.
1-5