Select Line Wrap/Truncate Modes - Dymo LabelWriter SE300 User Manual

GS T
DESCRIPTION
Determines how to handle a text wrap condition. A text wrap
condition occurs when text extends beyond the end of a line or a
page. The default is to wrap at the end of a line and a page.
EXPRESSION
ASCII
Decimal
Hex
PARAMETERS
n = 0 truncate in both directions
n = 1 wrap at end of line, but not end of page
n = 2 wrap at end of page, but not end of line
n = 3 wrap at end of line and end of page
EXAMPLE
For an example of this command's usage, see Appendix A,
page 90, Example 33.
For an example of this command using the Caret feature see page
100, Example 33
4-66

Select Line Wrap/Truncate Modes

GS T n
29 84 n
1D 54 n