Set Bar Code Height - Dymo LabelWriter SE300 User Manual

GS h
DESCRIPTION
Defines the height of the bars (in dots) for bar codes. The height
is defined in n/203 inch increments. For example, specify 203 as
the value for n to print a 1-inch high bar code. The bar code
height is always rounded up to the next multiple of 8.
EXPRESSION
ASCII
Decimal
Hex
PARAMETERS
n = the desired height (in dot lines) of the bar code
EXAMPLE
For an example of this command's usage, see Appendix A,
page 91, Example 37.
For an example of this command using the Caret feature see page
101, Example 37.
4-70

Set Bar Code Height

GS h n
29 104 n
1D 68 n