Set Bytes Per Line - Dymo LabelWriter SE300 User Manual

ESC D
DESCRIPTION
Provided for LabelWriter EL compatibility.
This command defines the number of bytes in a single line of EL
bitmap data. The LabelWriter SE300 prints up to 56 bytes (448
dots) of bitmap data. Use of this command, along with the ESC B
command, can drastically reduce the number of data bytes
required to skip blank areas.
SEE ALSO
ESC B
SYN
ETB
EXPRESSION
ASCII
Decimal
Hex
PARAMETERS
n1 = number of bytes per line (default = the allowed maximum,
56 bytes)
EXAMPLE
For an example of this command's usage, see Appendix A,
page 86, Example 13.
For an example of this command using the Caret feature see page
96, Example 13
ESC D n1
27 68 n1
1B 44 n1

Set Bytes per Line

4-41