Clearing Label Jams; Troubleshooting - Dymo LabelWriter SE300 User Manual

Clearing Label Jams

If you find labels jammed in the LabelWriter, follow these steps
to remove them.
1. Tear off any labels that have been fed through the
printer..
2. As you lift the platen release lever, pull the label out of
the platen mechanism. See figure below..

Troubleshooting

Since the LabelWriter is extremely reliable and intuitive, there's
an excellent chance you'll never have to look in this section.
However, if you do find yourself in need of some type of
troubleshooting advice, use this section to correct the problem.
Check the Power to the Printer
Be certain the printer is turned on. The on/off light glows green
when the printer is turned on. If pressing the on/off button does
not turn the printer on, check the power connection at the wall
and at the LabelWriter. If the printer still will not turn on, plug
another machine into the outlet to be certain the outlet is
functional.
Printer Self-Test
To be certain that your LabelWriter is working (printing and
feeding) properly, you can run a self-test by doing the following:
B-107