Set Characters Per Line (Landscape) - Dymo LabelWriter SE300 User Manual

GS t
DESCRIPTION
Creates an internal memory buffer to store landscape text and bar
codes until a form feed is received. The size of the buffer is
determined by n, the number of characters per line. The n
parameter is converted internally to millimeters so new line
lengths can be automatically calculated in the event a font change
takes place. The conversion to millimeters is done by multiplying
the value of n by the width of whatever font is currently set when
the GS t command is sent.
This command may be used in conjunction with the GS T
command to determine where, if at all, text wraps to the next line.
This command is similar to the GS u command.
SEE ALSO
GS u
GS T
EXPRESSION
ASCII GS
Decimal 29
Hex 1D
PARAMETERS
n = the desired number of characters per line in landscape mode
EXAMPLE
For an example of this command's usage, see Appendix A,
page 92, Example 41.
For an example of this command using the Caret feature see page
102, Example 41.
Set Characters per Line in Landscape
t n
116 n
74 n
4-77