Dymo LabelWriter SE300 User Manual page 130

ESC U (Set font to 10 cpi command),
52
ESC V (Return firmware revision
command), 53
ESC W (Wrap data command), 54
ESC X (Set horizontal start position
command), 12, 17, 55
ESC y (Set 203 x 203 dpi command),
57
ESC Y (Set vertical start position
command), 17, 56
ESC z (Set 136 x 203 dpi command),
57
ETB (XL mode compressed graphics
command), 35
F
Feed n sublines command (ESC J),
45
Feed n text lines command (GS d), 70
Feed sublines command (ESC F 1),
44
FF (Form feed command), 29
fonts, 116
related commands, 18
statistics, 14
Form feed command (ESC E), 43
Form feed command (FF), 29
G
graphic objects, 20
GS * (Landscape mode graphics
command), 20, 62
GS ~ (Enter debug mode command),
82
GS A (Starting position of bar code
command), 64
GS d (Feed n text lines command), 70
GS DC2 (Set font to double height
command), 18, 58
GS DC3 (Cancel double height
command), 18, 59
GS h (Set bar code height command),
19, 71
GS k (Print bar code command), 19,
72
Index-126
GS l (Draw line in landscape mode
command), 20, 74
GS L (Set feed length command), 17,
65
GS q (Print UPC/EAN checksum
command), 77
GS RS (Set inverse print mode
command), 18, 60
GS S (Return printer status
command), 66
GS T (Select line wrap/truncate
modes command), 17, 18, 67
GS t (Set characters per line in
landscape command), 16, 78
GS u (Set characters per line in
portrait command), 79
GS US (Cancel inverse print mode
command), 61
GS V (Set print orientation
command), 12, 16, 68
GS W (Set bar code element width
command), 19, 69
GS w (Set bar code module width
command), 19, 80
GS x (Print MaxiCode bar code
command), 81
H
hexadecimal character values, 123
Horizontal tab command (HT), 27
host setup, 7
HT (Horizontal tab command), 27
L
label
jams, 109
labels, 119
ordering, 119
Landscape mode graphics command
(GS *), 20, 62
landscape print mode, 16
LF (Line feed command), 28
Line feed command (LF), 28
line objects, 20