Set Horizontal Starting Position - Dymo LabelWriter SE300 User Manual

ESC X
DESCRIPTION
This command is used in landscape printing to set a new offset
from the left margin from which to begin printing text and bar
code objects. Distance is specified in dots (1 dot = 1/203 of an
inch). The n1 and n2 parameters are evaluated to form a 16-bit
word as follows: first, the n1 parameter's decimal value is
multiplied by 256, then the result is added to the decimal value of
the n2 parameter.
EXPRESSION
ASCII
Decimal
Hex
PARAMETERS
n1 = high-order byte of 16-bit word that specifies distance
n2 = low-order byte of 16-bit word that specifies distance
EXAMPLE
For an example of this command's usage, see Appendix A,
page 87, Example 23.
For an example of this command using the Caret feature see page
98, Example 23
4-54

Set Horizontal Starting Position

ESC X n1
27 88 n1
1B 58 n1
n2
n2
n2