Renesas RL78/I1D User Manual page 51

DETECT-IT RL78/I1D detector boards kit Kit User Manual
Figure Connection of E1 to PC and to board (example of Motion detector)
Be careful because the cable with the red color (which is pin 1 of the connector) should be connected to pin CN01_pin
1. Look following picture for illustration.
Caution: Battery should never be installed when using E1 power supply or external power supply via CN02/CN01.
Figure Connection of E1 to board (example of Glass Break detector)
Step 4/ Once the sample programs are copied on your PC, and IAR Embedded Workbench is installed, please open the
samples programs with IAR.
You can access the samples programs from you start menu, in the Program sections under <Renesas Electronics Tools>
then <YDETECT-IT-RL78> by clicking on <Samples Programs>.
Or you can go directly to <C:\Renesas\Workspace\YDETECT-IT-RL78\Sample Programs> which is the default
installation program.
UM-YDETECT-IT-RL78 V1.30 Page 51 of 59