DETECT-IT RL78/I1D detector boards kit
Kit User Manual
The board can be powered by a 3V lithium battery (CR123). It can also be powered by power supply (E1 power supply
or external power). One battery CR123 is provided into the kit for the 4 boards. The E1 debugger is not provided.
Caution: Battery should never be installed when using E1 power supply or external power supply via CN02/CN01.
3.
Boards layout
Below are pictures of each board with short explanation of the main parts. The name of each board is written, on the
PCB (Please look at the PCB to identify each board).
Glass Break detector board layout
Please check the name of the board you are looking "GLASSBREAK_SENSOR_I1D"
Figure Glass break detector top view
UM-YDETECT-IT-RL78 V1.30
Page 10 of 59