Cable Configuration - Siemens SIMATIC ET 200AL System Manual

3.4

Cable configuration

Considering cable configuration
Information on the cable configuration can be taken into consideration for calculation of the
bus parameters. To do so, select the check box "Take into account the following cable
configuration" in the properties of the PROFIBUS subnet.
The other information depends on the type of cable used.
Figure 3-4 Cable configuration
Cable configuration: Fiber-optic cables/optical ring
The calculation depends on the used OLM types. Select the corresponding check box.
Multiple selections are possible.
PROFIBUS with STEP 7 V13
Function Manual, 12/2014, A5E03775446-AC
Parameter assignment/addressing
3.4 Cable configuration
49