Siemens SIMATIC ET 200AL System Manual page 1673

Diagnostics and maintenance
4.9 Maintenance
Element of the data
structure
108
Designation according to IEC
61158-6-10
AM_DeviceIdentification
AM_TypeIdentification
IM_Hardware_Revision
(not at
AM_FirmwareOnlyInformation)
Code
Identification of the device. The struc-
ture is as follows:
AM_DeviceIdentification.DeviceSubID
(for SIEMENS e.g. 0x0000)
AM_DeviceIdentification.DeviceID
(Device ID from manufacturer, 0x0000
to 0xFFFF)
AM_DeviceIdentification.VendorID
(Example for Siemens assets: 0x002A)
AM_DeviceIdentification.Organization:
Example for Siemens assets: 0x0000
(PROFINET)
Manufacturer-allocated type identifi-
cation:
0x0000: Unspecified
0x0001: Controller (PLC)
0x0002: PC-based
0x0003: IO module, IO submodule
0x0004: Communications module /
submodule
0x0005: Interface module / submod-
ule
0x0006: Active network component
0c0007: Media attached unit (bus
adapter)
0x0100 to 0x7FF: Manufacturer-
specific
Version of the hardware (0x0000 to
0xFFFF)
Example: 0x0003
If AM_HardwareRevision is padded
with spaces, you should evaluate
IM_Hardware_Revision.
Function Manual, 05/2021, A5E03444486-AL
Data type /
length in bytes
Array of Byte / 8
UINT / 2
UINT / 2
PROFINET with STEP 7