Siemens SIMATIC ET 200AL System Manual page 2184

Setting for Time-based IO
If you have no special response time requirements, the following setting is suitable as a
starting point:
● Send clock: 2 ms
● Application cycle: 4 ms
● Assignment to the process image partition: PIP1
● PIP_Mode: 0 (OIP model)
FAQ
For more information, see the following FAQs in the Siemens Industry Online Support:
● Entry ID 109738186 (https://support.industry.siemens.com/cs/ww/en/view/109738186)
● Entry ID 109736374 (https://support.industry.siemens.com/cs/ww/en/view/109736374)
See also
Programming of Time-based IO (Page 28)
26
Configuring and parameter assignment
3.2 Settings for Time-based IO
High-precision input/output with Time-based IO
Function Manual, 11/2019, A5E33454822-AC