Parameter Settings For Isochronous Mode; Viewing Isochronous Mode Parameters - Siemens SIMATIC ET 200AL System Manual

5.1.8

Parameter settings for isochronous mode

Parameter changes as task of the field service technician
The task of a field service technician is to maintain the production process.
In this context the technician has to detect, localize and eliminate errors and performance
losses of isochronous mode.
All parameters which influence isochronous mode can be checked and configured using the
"Isochronous mode" dialog box.
Parameters should only be changed by experienced users or service technicians.
5.1.8.1

Viewing isochronous mode parameters

"Isochronous mode" dialog box
1. Select "Properties > Isochronous mode" in the Inspector window.
The "isochronous mode" dialog box opens with an overview of parameters which
influence isochronous mode.
Information on the individual parameters is available under "Detail overview".
2. Compare the values shown with the values in the documentation, or with the value
specified by a technician.
Figure 5-7 Viewing parameters for isochronous mode
PROFIBUS with STEP 7 V13
Function Manual, 12/2014, A5E03775446-AC
Functions
5.1 Isochronous mode
71