Integrated Peripherals - QDI BrillianX 8V Manual

Award BIOS Description

Integrated Peripherals

Figure-8 Integrated Peripherals Menu
The following indicates the options for each item and describes their meaning.
Item Option
OnChip IDE Enabled
l
channel 0/1 Disabled
IDE Prefetch/Mode Enabled
l
Disabled
IDE HDD Bl o ck Enabled
l
Mode
Disabled
IDE Mode 0 - 4
l
Primary/ Secondary
Master/Slave PIO Auto
IDE Auto
l
Primary/ Secondary
Master/Slave UDMA Disabled
Init Display First PCI SLOT
l
AGP
Onboard FDC Enabled
l
Controller Disabled
Onboard Serial 3F8/IRQ4,
l
Port 1/2 2F8/IRQ3,
3E8/IRQ4,
2E8/IRQ3,
Auto
Description
Enables on chip IDE First/Second Channel.
Disabl e s on chip IDE First/Second Channel.
Enables IDE Prefetch Model.
Disables IDE Prefetch Model.
Allows IDE HDD to read/write several sectors
at once.
IDE HDD only reads/writes a sector once.
Defines the IDE primary/secondary master/ slave
PIO mode.
The IDE PIO mode i s defined by auto -detection.
Ultra DMA mode will be enabled if ultra DMA device
is detected.
Disables this function.
Initializes the PCI VGA first. If a PCI VGA card
and an AGP card are installed together in the
system, the one initialized first functions.
Initializes the AGP first.
Onboard floppy disk controller is enabled.
Onboard floppy disk controller is disabled.
Defi n es the onboard seri a l port address and required
interrupt number.
Onboard serial port address and IRQ are
M a nua l f or B r i l l i a nX 8V