QDI BrillianX 8V Manual page 18

Award BIOS Description
Swap F loppy Enabled
l
Drive
Disabled
Boot Up On
l
Numlock Status Off
Gate A20 Normal
l
Option
Fast
Memory Parity Enabled
l
/ECC check
Disabled
Password Setti n g System
l
Setup
IDE second Enabled
l
channel control Disabled
OS Select For Non-OS2
l
DRAM>64MB
OS2
HDD S.M.A.R.T Enabled
l
Capability Disabled
Video BIOS Enabled
l
Shadow
Disabled
C8000~CBFFF Enabled
l
Shadow:
DC000-DFFFF
Shadow: Disabled
Show Bootup Enabled
l
Logo Disabled
Exchanges the assi g nment of A&B fl o ppy drives.
The assignment of A&B fl o ppy drives are normal.
Keypad is used as number keys.
Keypad is used as arrow keys.
The A20 si g nal i s controll e d by the keyboard controller
or chipset hardware.
Default setting. The A20 signal i s control l ed by Port 92
or the chipset specific method.
Enables the Error Checking& Correction if ECC
memory is used.
Disables the ECC function.
The system will not boot and access to BIOS
Setup will be denied if the cor rect pass word is
not entered when pr ompted.
The system will boot up, but access to BIOS
Setup will be denied if the correct password is not
entered when prompted.
Enables the second IDE channel.
Disables the second IDE channel and release the
IRQ.
If your operating system is not OS/2, please select
this item.
If system DRAM is more than 64MB and the operating
system is OS/2, please select this item.
Enables S.M.A.R.T hard disk support.
Invalidates this feature.
Video BIOS will be copied to RAM. Video Shadow
will inc rease the video speed.
Video shadow is disabled.
Optional ROM wi l l be copied to RAM by 16K bytes
per unit.
The shadow function is disabled.
Enables the logo when system boots up.
Logo will not be shown when system boots up.
M a nua l f or B r i l l i a nX 8V