QDI BrillianX 8V Manual page 34

Appendix
Appendix B.
Appendix B.
Retention Mechanism & Pentium
sor Installation Procedures
1. Place Pl a stic Guide with plastic caps on the motherboard, and secure all four caps.
Note: 1. Please choose four caps which match the motherboard.
2. If choosing to use Celeron
Plastic Guide.
3. Please note the Plastic Guide has one orientation. If one way doesn't fit, change
the direction to the other way. Do not forcefully press the Plastic Guide onto the
motherboard.
2. Install HSSBASE (Heatsink Support Base) on motherboard, then insert the two plastic
pins through the HSSBASE s ecuring it to the motherboard.
II/ Celeron
®
Plastic Guide w ith
four nuts
Celeron fittings
TM
Processor, snap-on Celeron fittings onto the
M a nua l f or B r i l l i a nX 8V
Proces-
TM
Window s