QDI BrillianX 8V Manual page 15

Halt On
This category determines whether or not the computer will stop if an error is detected
during powering up.
No errors The system boot will not stop for any errors that may be
detected.
All errors Whenever the BIOS detects a non-fatal error, the system will
stop and you will be prompted.
All, But Keyboard The system boot will not stop for a keyboard error; but it will
stop for all other errors.
All, But Diskette The system boot will not stop for a disk error; but it will stop
for all other errors.
All, But Disk/Key The system boot wi l l not stop for a keyboard or di s k error, but it wi l l
stop for all other errors.
Memory
This is a Display-Only Category, determined by POST (Power On Self Test) of the BIOS.
Base Memory
Extended Memory
Other Memory
Total Memory
The POST of the BIOS will determine the amount of base
(or conventional) memory installed in the system.
The BIOS determines how much extended memory is
presented during the POST.
This is the memory that can be used for different
applications. Shadow RAM is most used in this area.
Total memory of the system equals the sum of the above
memory.
M a nua l f or B r i l l i a nX 8V
Chapter 3