Electromagnetic Compatibility / Emc Guidelines; Emitted Interference Guideline And Manufacturer Declaration - GERATHERM Diffustik Instructions For Use Manual

12.4

Electromagnetic Compatibility / EMC Guidelines

The manufacturer tests his products for emitted interference and
interference resistance. Compliance with the relevant standards
and directives is certified in the Declaration of Conformity that
accompanies this device. The results of the EMC test can be
found in the following chapter.

12.4.1 Emitted Interference Guideline and Manufacturer Declaration

Guidelines and manufacturer's declaration – electromagnetic emissions
The Diffustik is determined for operation in an electromagnetic environment as specified below.
The user / operator of the Diffustik should ensure that it is operated in this environment.
Measurement of
electromagnetic emissions
RF emissions CISPR 11
RF emissions CISPR 11
Emissions of harmonic
oscillations according to
IEC 61000-3-2
Emissions of voltage
fluctuations / flicker
according to
IEC 61000-3-3
Page 92
Compliance Electromagnetic environment – Guideline
Group 1 The Diffustik uses RF energy exclusively for its
internal function. Therefore, its RF emission is very
low and is improbable to interfere with adjacent
electronic equipment.
Class B The Diffustik is suitable for use in all
establishments, including living areas and those
Class A
directly connected to the public supply network,
which also supplies buildings used for residential
purposes.
Compliance
Diffustik / Variant PFTstik
Serial no.: xx|8|401|yyy and 2401xxxxx
Version: 8 | Release date: 16. August 2021
Instructions for Use