Operation / Servicing And Maintenance - GERATHERM Diffustik Instructions For Use Manual

3.3

Operation / Servicing and Maintenance

Page 36
Danger to life.
Reason: Electric shock. Carbon monoxide (CO)
intoxication. Explosion. Device damage. Unpredictable
movement of metal parts.
For this: Comply with the required installation and
operating conditions! Therefore:
•
In principle, observe chap. 12 "Technical
Specifications"!
•
When using the optional diffusion measurement,
note the separate IFU Add-on CO Diffusion!
•
Do not operate Diffustik resp. the variant PFTstik
if there are flammable or explosive gases in the
room!
•
Do not operate Diffustik resp. the variant PFTstik
near the magnetic field of an MRT system!
Possible danger to life.
Reason: Electrical shock. Cross-contamination or
measurement error. For this: Ensure that the used
components are undamaged and that you are working
in a careful way! Therefore:
•
Do not use consumable articles with a limited life
span after their use-by date has expired!
•
Prior to each use, visually inspect the total
system (housing, cables, connectors, tubings,
pneumatic connections, etc.) for any damages!
•
If there are any damages, do not operate the
system. The damaged parts must be replaced
or repaired properly!
Diffustik / Variant PFTstik
Serial no.: xx|8|401|yyy and 2401xxxxx
Version: 8 | Release date: 16. August 2021
Instructions for Use