The Technical State Of Diffustik / Variant Pftstik And System Construction - GERATHERM Diffustik Instructions For Use Manual

3.2 The Technical State of Diffustik / Variant PFTstik and System
Construction
Page 34
Possible danger to life.
Reason: Electric shock. Cross-contamination.
Misdiagnosis caused by measurement error. Therefore:
•
Do not overstress Diffustik resp. the variant
PFTstik! Use with care!
•
Do not modify or use product Diffustik resp. the
variant PFTstik or total system contrary to the
respective manufacturer's specification!
•
Only use Diffustik resp. the variant PFTstik within
its expected service life, determined by the
manufacturer!
•
Under no circumstances use or connect any
devices, systems, equipment and other products
that are not part of the total system!
•
Never obstruct the access to the mains plug or
On / Off Switch of the equipment cart!
Disconnection of the power supply must be easily
accessible!
•
Only use accessories and consumables which are
authorised by the manufacturer as well as
authorised replacement components, add-ons
and auxiliary materials.
Ensure that the components are in faultless
condition!
•
Ensure that in the patient environment – a
distance of 1.5 meters to the patient – there are
no accessible electrical parts (interfaces, plugs,
etc.) that are not isolated from the mains with an
isolation voltage of 4 kV!
Diffustik / Variant PFTstik
Serial no.: xx|8|401|yyy and 2401xxxxx
Version: 8 | Release date: 16. August 2021
Instructions for Use