Installation And Operating Conditions - GERATHERM Diffustik Instructions For Use Manual

Instructions for Use
Diffustik / Variant PFTstik
Serial no.: xx|8|401|yyy and 2401xxxxx
12.2

Installation and Operating Conditions

The following conditions supplement chap. 2.2 "Intended Use"
and must be observed to maintain the properties of the Diffustik
resp. the variant PFTstik guaranteed by the manufacturer and for
the safety of the patient and user / operator.
Storage / Transport:
Temperature:
Relative air humidity:
Operation:
Environmental temperature:
Relative air humidity:
Atmospheric pressure:
Setup:
Space requirement:
(complete with medical cart)
Required floor load capacity:
Flooring:
Environment / room:
Operating Mode:
Version: 8 | Release date: 16. August 2021
min. max.
-10 °C +50 °C
0 % 95 %
min. max.
+10 °C +35 °C
20 % 95 %
(at least. 30 % for synthetic flooring)
800 hPa 1080 hPa
mobile
(L) 900 mm x (W) 900 mm x (H) 1900 mm
150 kg/m²
stable; even; conductive
Closed, clinical area
air-conditioned
not an explosive or flammable environment!
not near an MRI!
well ventilated
Continuous operation
non-condensing
Avoid extreme
fluctuations in
temperature!
non-condensing
Page 89