Inserting/Removing The Clp - Siemens SIMATIC NET RUGGEDCOM RST2228P Installation Manual

For more information about configuring the device, refer to the RUGGEDCOM ROS
Configuration Manual associated with the installed software release.
3.3

Inserting/Removing the CLP

The RUGGEDCOM RST2228P accepts a CLP for storing configuration files and/or
software updates. A protective cover is provided to prevent the ingress of dust and
dirt when the CLP is not in use.
Mechanical/electrical hazard – risk of damage to the CLP
•
•
•
Security hazard – risk of unauthorized access and/or exploitation
Make sure to remove the CLP before decommissioning the device or sending the
device to a third-party.
Contamination hazard – risk of dust and dirt entering the CLP slot
When the CLP is not installed, make sure the protective cover is installed in its place.
Removing the CLP
To remove the CLP, do the following:
Configuration hazard – risk of data loss
After uploading or downloading a file, allow at least twenty seconds before
removing the CLP to ensure the data has been fully transferred.
RUGGEDCOM RST2228P
Installation Manual, 07/2021, C79000-G8976-1403-13
NOTICE
Do not expose the CLP to extreme temperatures or humidity
Do not expose the CLP to large magnetic or static electric fields
Do not bend or drop the CLP
NOTICE
NOTICE
NOTICE
Device Management
3.3 Inserting/Removing the CLP
29