Required Tools And Materials; Decommissioning And Disposal - Siemens SIMATIC NET RUGGEDCOM RST2228P Installation Manual

Introduction
1.3 Required Tools and Materials
Power Supply Terminal Block
Chassis Ground Terminal
1.3

Required Tools and Materials

The following tools and materials are required to install the RUGGEDCOM RST2228P:
AC/DC power cord
Lightning protector
Flathead screwdriver
Torx T10 screwdriver
Phillips screwdriver
8 x M6 or #10-32 screws
8 x M6 or #10-32 screws
Braided or equivalent ground wire
1.4

Decommissioning and Disposal

Proper decommissioning and disposal of this device is important to prevent malicious
users from obtaining proprietary information and to protect the environment.
Decommissioning
This device may include sensitive, proprietary data. Before taking the device out of
service, either permanently or for maintenance by a third-party, make sure it has
been fully decommissioned.
For more information, refer to the associated Configuration Manual.
Recycling and Disposal
For environmentally friendly recycling and disposal of this device and related
accessories, contact a facility certified to dispose of waste electrical and electronic
6
• "Connecting the Failsafe Alarm Relay (Page 14)"
• "Failsafe Alarm Relay Specifications (Page 39)"
• "Connecting External PoE Power (Page 21)"
A pluggable terminal block. For more information, refer to:
• "Connecting Power (Page 15)"
• "Power Supply Specifications (Page 37)"
Protects the device from power surges and accumulated static
electricity. For information about grounding the device, refer to
"Connecting Power (Page
Tools/Materials
15)".
Purpose
For connecting power to the device. For the
required wire gage, refer to
Specifications (Page 37)".
For protecting the device from harmful electrical
strikes.
For removing or installing modules and terminal
blocks.
For removing or installing modules.
For removing or installing terminal blocks.
For mounting the device to a panel.
For mounting the device to a rack.
For grounding the device to safety Earth.
Installation Manual, 07/2021, C79000-G8976-1403-13
"Power Supply
RUGGEDCOM RST2228P