Evc On The Dashboard - Volvo Penta D3-130A Operator's Manual

EVC on the dashboard

The EVC/MC system, located on the control panel of the boat, consists of four main components: Tachometer/
LCD Gauge, Button Panel, Alarm display and Easy link gauges. These components are used in conjunction with
the trim control.
Tachometer/LCD Gauge
provides you with the engine RPMs on the dial gauge.
Depending on wich tachometer that is installed the LCD
screen will show engine hours or provide you various
displays of the EVC menus and submenus, that are
explained in "Menu system".
LCD display
Button Panel
allows you to navigate through the EVC menus and
submenus on the Tachometer/LCD display. The but-
tons on this panel also allow you to make modifications
to various user-defined settings.
Up Arrow:
Used to scroll up through menus. Also used in some
submenus to make changes to settings (increase val-
ues).
Down Arrow:
Used to scroll down through menus. Also used in some
submenus, Also used in some submenus to make
changes to settings (decrease values).
Right Arrow:
Used to move into a submenu or to confirm a change
in settings.
Left Arrow:
Used to move into a menu that is a level higher than
the current menu or to abort a change in settings. This
arrow is also used to acknowledge fault messages.
Instruments
19