Volvo Penta D3-130A Operator's Manual page 32

Menu system
30
Depth Al. On/Depth Al. Off
Once you have set the depth alarm level, you have the
option of leaving the alarm active or turning it off. When
setting the depth alarm, EVC acknowledges that
you've set it by displaying an "ON" message. When
you switch the depth alarm off, the system acknowl-
edges with an "OFF" message.
Available Button Selections:
Trip Data (Reset)
The Trip Data (Reset) submenu allows you to "zero-out"
any trip related data that you may have accumulated.
For example, when starting a new trip, you would want
to clear all the accumulated information from previous
trips. This submenu will allow you to clear all the exist-
ing data and start a new trip with all new information for
the trip you are about to take.
NOTE! When you reset the trip data, ALL of the infor-
mation stored for a trip is reset.
You can begin the trip data reset process by pressing
the right arrow button when you are in the Trip Data
(Reset) screen.
Available Button Selections:
Conf. Reset
Once you've initiated a trip data reset, you will be
asked to confirm the reset. Pressing the right arrow
button in this screen acknowledges that you do indeed
wish to reset all the stored information for the current trip.
If you decide you'd rather keep the existing data and
continue logging trip information, simply press the left
arrow key to abort the reset action.
Available Button Selections:
Trip Data Reset
Once you've acknowledged that you want to reset trip
data, all the information for the current trip will be
cleared and EVC will inform you that the trip data has
been reset. The notification screen is displayed for a
short while, then the previous menu reappears.
Available Button Selections: None