Starting The Engine; General About Starting; Before Starting - Volvo Penta D3-130A Operator's Manual

Hide thumbs Also See for D3-130A:
Table of Contents

Advertisement

Starting the engine

Make it a habit to give the engine and engine bay a visual check before starting. This will help you to discover
quickly if anything abnormal has happened, or is about to happen. Also check that instruments and warning dis-
plays show normal values after you have started the engine.
To minimize starting smoke in cold starting, we recommend that a heater should be installed to warm the engine
bay at temperatures below +5°C.
WARNING! Never use start spray or similar products as a starting aid. Explosion risk!
General information about starting
The engine control lever must always be in neutral be-
fore starting. The engine management system ensures
that the engine receives the correct amount of fuel -
even when the engine is cold.
The idling speed is also governed by engine tempera-
ture, and is somewhat raised after a cold start.

Before starting

Open the fuel tap
Open the seawater intake.
Do the tasks under the "Daily before first start"
heading in the maintenance schedule.
Turn on the main switches.
IMPORTANT! Never disconnect the current with
the main switches on when the engine is running.
This can damage the alternator.
Start the engine bay fan, if one is installed, and let
it run for at least four minutes.
Check that the amount of fuel aboard is enough for
your planned voyage.
Check the oil level.
Lower the drive(s), if raised.
37

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

D3-160aD3-190aD3-110iD3-130iD3-160iD3-190i

Table of Contents