Fuel Tank; Evc Info - Volvo Penta IPS User Manual

Calibration and Settings
Language
Components
124
Language
Setting the language the information of the screen will
be shown in. There are 10 languages to choose from.
On boats with several helm stations and several
screens it is enough to select a language in one station
for it to be displayed at all of them.
1 Navigate to Language in the settings menu. Press
to open the language menu.
2 Navigate to the desired language and press
to confirm the selection.
The screen will return automatically to the settings
menu.

EVC Info

Information regarding accessories, components and
the type of software installed in the boat is displayed
here.
1 Navigate to EVC Info in the settings menu and
press to open the submenu.
2 Features shows the accessories that are installed.
Press to open the submenu.
3 Components shows what hardware components
are installed. Press
4 Software shows what software is installed. Press
to open the submenu.

Fuel Tank

There are two alternative methods for calibrating the
level sensor in the fuel tank.
Multipoint provides more precise results while Full Fuel
Tank Calibration is an approximate method
Multipoint calibration is a prerequisite if the trip com-
puter is to show fully accurate information.
Multipoint
In order for multipoint calibration to be carried out, the
fuel tank may not be filled to more than 20% of its total
capacity.
1 Turn to Fuel Tankin the settings menu and press
to access the calibration menu.
2 Turn to Multi Point Calibration and press
3 Calibration is carried out in 5 steps.
Fill the tank with the quantity shown in the display,
POS).
Wait 10 seconds.
Press to confirm that the tank has been filled
to the indicated level.
47705796 05-2014 © AB VOLVO PENTA
to open the settings menu.
.