Volvo Penta D3-130A Operator's Manual page 25

Gauges
The Gauges screen allows you enter submenus that
provide the following information:
• Engine Speed
• Coolant Temperature
• Voltage
• Boat Speed
• Trim Position
• Fuel Level
Explanations for these submenus are provided in the
section "Gauges Menu".
Available Button Selections:
Settings
The Settings screen allows you enter submenus that
provide the following options:
• Depth Alarm Level and On/Off Settings
• Reset Trip Data
• Backlight Brightness and LCD Contrast Levels
• Measurement Units Selection
• Speed/Distance Units Selection
• Depth Offset Setting
Explanations for these submenus are provided in the
section "Settings Menu".
Available Button Selections:
No Faults
The No Faults screen is where system faults are dis-
played when or if a fault occurs. When the EVC sys-
tem detects a new fault, the alarm will sound and the
display will automatically switch to show the newest
fault in the Faults submenu.
The letters "AL" will blink in the upper left corner of the
screen, regardless of which screen is active whenever
there is a current fault.
A new fault causes an automatic switch to the Faults
submenu, press the left arrow to revert back to the pre-
viously active screen.
For a detailed description of the types of faults that
may be displayed, please refer to "Fault code register"
and "LCD Alarm Warnings" .
Available Button Selections:
Menu system
23