Main Menu - Volvo Penta D3-130A Operator's Manual

Main Menu

The main menu consists of four screens that provide environmental data and boat information. Additionally, the
main menu allows you to access three submenus which provide more information. Some of these submenus also
allow you to make changes to the way in which the EVC system operates.
Main menu informational data includes the following options: Depth, Water Temperature, Engine Hours, Instant
Fuel Rate, Instant Fuel Economy, and a Faults menu that displays the fault status when or if one is detected.
The submenus include the following options: Trip Data, Gauges, Settings, and Faults.
Each menu description below includes arrows that depict which buttons may be used in the active menu screen.
Depth
(only available with the multisensor, additional
instrumentation)
The depth sensor is located below the transducer. Depth
readings are offset by the value entered in the "Depth
Offset setting" screen. It can indicate true water depth,
depth under the keel/hull, or include a safety margin.
Depth may be displayed as Meters (M) or Feet (FT),
depending on the units selected in the "Settings" menu
(Metric or English).
Available Button Selections:
Water Temp
(only available with the multisensor, additional
instrumentation)
The water temperature screen provides a real-time
display of the sea water temperature outside the boat.
The temperature may be displayed as either degrees
Celsius ( C) or degrees Fahrenheit (
o
units selected in the Settings Menu (Metric or English).
Available Button Selections:
Engine Hours
The Engine hours screen provides an accumulated
total of the number of hours that the boat's engine has
been run.
Available Button Selections:
Menu system
F), depending on the
o
21