View Information - BAFANG DP C13.CAN User Manual

7.7.1.4 Set Auto Off
When the system is on, press and hold (>2S)
the and button at same time to
access the "Setting" interface, repetitively
press the button until the "oFt" appears
on the display (as shown below). And then
press to increase or
Off for 1-9 minute).
Once you have chosen your desired selec-
tion, press (<0.3S) the
and to enter next item "Service Tip".
7.7.1.5 Set support level
When the system is on, press and hold (>2S)
the and button at same time to ac-
cess the "Setting" interface, repetitively press
the button until the "dH" appears on the
display (as shown below). And then press
or to select support level (3,5,9), The
level is 5 in default.
Once you have chosen your desired selec-
tion, press (<0.2S) the
and to enter next item "Wheel Size".
to reduce (Auto
button to save
button to save
8

7.7.2 View Information

All data in this item cannot be changed, only to
be viewed.
7.7.2.1 Wheel Size
When the system is on, press and hold (>2S)
the and button at same time to ac-
cess the "Setting" interface, repetitively press
the button until the "LUd" appears on
the display (as shown below). And you can
press and hold (>2S) the
together exit to the main interface.
Once you have viewed your desired informa-
tion, press (<0.2S) the
next item "Speed Limit".
7.7.2.2 Speed Limit
When the system is on, press and hold (>2S)
the and button at same time to ac-
cess the "Setting" interface, repetitively press
the button until the "SPL" appears on
the display (as shown below). And you can
press and hold (>2S) the
together exit to the main interface.
Once you have viewed your desired informa-
tion, press (<0.2S) the
next item "Controller software info".
BF-UM-C-DP C13-EN November 2019
and button
button to enter
and button
button to enter