View Information - BAFANG DP C01.CAN BUS User Manual

7.7.1.5 Set support level
When the system is on, press and hold
and for 2 seconds to the setting inter-
face, repetitively press (<0.5S)
support level interface (as below), and then
press or to select level (3/5/9).
Press and hold and
to save and exit to the main interface.

7.7.2 View Information

All data in this item cannot be changed, only to
be viewed.
7.7.2.1 Wheel Size
When the system is on, press and hold
and for 2 seconds to the setting inter-
face, repetitively press (<0.5S)
wheel size interface (as below).
Press and hold and
to exit to the main interface. Or press (<0.5S)
to enter next item "Speed Limit".
7.7.2.2 Speed Limit
When the system is on, press and hold
and for 2 seconds to the setting inter-
face, repetitively press (<0.5S)
BF-UM-C-DP C01-EN November 2019
until the
button together
until the
button together
until the
speed limit interface (as below).
Press and hold and
to exit to the main interface. Or press (<0.5S)
to enter next item "Display Information".
7.7.2.3 Display Information
When the system is on, press and hold
and for 2 seconds to the setting
interface, repetitively press (<0.5S)
display hardware version (dHc) or software
version (dSc) interface (as below).
Press and hold and
er to exit to the main interface. Or press
(<0.5S) to enter next item "Controller
Information".
Hardware version of display
Software version of display
7
button together
until
button togeth-