Normal Operation; Switching The System On/Off; Selection Of Support Levels; Headlights / Backlighting - BAFANG DP C13.CAN User Manual

7.6 NORMAL OPERATION

7.6.1 Switching the System ON/OFF

Press and hold (>2S) on the display to
turn on the system. Press and hold
again to turn off the system.
If the "automatic shutdown time" is set to 5
minutes (it can be reset with the "Auto Off"
function, See "Set Auto Off"), the display
will automatically be turned off within the
desired time when it is not in operation.

7.6.2 Selection of Support Levels

When the display is turned on, press the
or button (>2S) to switch to the support
level, the lowest level is 0, the highest level
is 5 (the amount of support level can be
set). When the system is switched on, the
support level starts in level 1. There is no
support at level 0.

7.6.3 Headlights / backlighting

Hold the button (>2S) to activate the
frontlight and taillights.
Hold the button (>2S) again to turn off
the frontlight and taillights. The brightness
of the backlight can be set in the display
settings "Brightness".
BF-UM-C-DP C13-EN November 2019
5

7.6.4 Walk Assistance

The Walk assistance can only be activated
(>2S)
with a standing pedelec.
Activation: Press the
this symbol
the
displayed, now the Walk assistance will
activate. The symbol
the pedelec moves approx. 5 km/h. After
releasing the
automatically and switches back to level 0.

7.6.5 Selection mode

Briefly press
Kilometer stand: total kilometers (ODO) -
daily kilometers (TRIP) - Remaining distance
(go) - Time (TIME) - Power Output (W) -
Energy consumption (SC) - Maximum speed
(MAX) - Average speed (AVG).
NOTE: Energy consumption is fitted only
with torque sensor.
5
continuously until
appears. Next hold down
button whilst the symbol is
will blink and
button, the motor stops
(0.5s) to view the different