Subscribe to Our Youtube Channel
Related Manuals for BAFANG DP C10.UART
Summary of Contents for BAFANG DP C10.UART
-
Page 1: Table Of Contents
CONTENT DP C10.UART CONTENT Content Normal indication area Introduction Button definition Appearances and dimensions Normal operation Specifications Parameter setting Functional overview Error code definition DISPLAY MANUAL DP C10.UART... -
Page 2: Introduction
The second line: PD2526051205 - Parameter code Content of QR code: DPC10F80201.1 PD2526051205 DP C10.U 1.0 602F8Q7280001 A. First line as below DP C10.U 1.0 ① DP C10.U : BAFANG Display model ② 1.0: Hardware version number DISPLAY MANUAL DP C10.UART... -
Page 3: Appearances And Dimensions
APPEARANCES AND DIMENSIONS APPEARANCES AND DIMENSIONS DISPLAY MANUAL DP C10.UART... -
Page 4: Specifications
• Rated current is 10mA • Storage temperature: -30℃~70℃ • Maximum operating current is 30mA • IP level: IP65 • Power-off leakage current is less than 1uA • Storage humidity: 30%-70% • Operating current supplied to controller is 50mA DISPLAY MANUAL DP C10.UART... -
Page 5: Functional Overview
• The maximum charging value is 5V&500mA light. through USB port. • 6-Level-Support: setting power Levels 0 to 5. • Trip distance indication: The maximum distance displayed is 99999. Single-trip distances TRIP or the total distance TOTAL can be displayed. DISPLAY MANUAL DP C10.UART... -
Page 6: Normal Indication Area
TRIP, the total distance TOTAL, Asisstance remaining distance TO GO, power W, Malfunction indication consume energy C. Menu • Distance indication: display of the distance Speed display depending on the setting. Speed model Distance indication Level indication DISPLAY MANUAL DP C10.UART... -
Page 7: Button Definition
Level 5. When the display is on, the can be set) the display will be automatically default mode is Level 1. When there is no turned off. numeric mode display, there is no power assistance. (power assistance lever selection interface as below figure) DISPLAY MANUAL DP C10.UART... - Page 8 • Walk Assistance Press for 2 seconds. The e-bike enters the walk assistance mode, and the symbol WALK is displayed. Once the key released, the e-bike will exit the walk as- sistance mode. DISPLAY MANUAL DP C10.UART...
- Page 9 If display is being on, only connect the USB cable to the port to the display and display begin charge. Maximum charge voltage is 5V, maximum charge current is 500mA DISPLAY MANUAL DP C10.UART...
-
Page 10: Parameter Setting
0 and 5. Press twice (interval < 0.3 seconds) – The higher the chosen figure, the higher the the display enters the MENU state. In the light sensitivity. speed field tC is displayed. If you press , DISPLAY MANUAL DP C10.UART... - Page 11 4) The maintenance alert function can be disabled: settings ->maintenance alert (MA) -> 0. (Maintenance alert can also be set via a computer. This requires a USB connection. See also the parameter setting instructions). DISPLAY MANUAL DP C10.UART...
- Page 12 2 1) Only when communication has been established between the battery and the ……… ……… controller the following information will be displayed, otherwise the display will only Voltage of show "- - - -". cell n DISPLAY MANUAL DP C10.UART...
-
Page 13: Error Code Definition
ERROR CODE DEFINITION ERROR CODE DEFINITION The DP C10.UART display can show e-bike faults. When a fault is detected, the icon will be displayed. In the speed field one of the following error codes will be displayed: Hint warning interface... - Page 14 NOTES DISPLAY MANUAL DP C10.UART...
- Page 15 NOTES DISPLAY MANUAL DP C10.UART...
- Page 16 NOTES DISPLAY MANUAL DP C10.UART...
Need help?
Do you have a question about the DP C10.UART and is the answer not in the manual?
Questions and answers