BAFANG DP C13.CAN User Manual page 11

7.7.2.11 Battery Information
When the system is on, press and hold (>2S)
the and button at same time to
access the "Setting" interface, repetitively
press the button until the "b01" appears
on the display (as shown below). And then
press or to view "Battery info".
You can also press and hold (>2S) the
and button together exit to the main
interface.
Once you have viewed your desired selec-
tion, press (<0.2S) the
main interface.
Content Explanation
b01 Current temperature (°C)
b04 Voltage (mV)
b06 Discharge (mA)
b07 Remaining Capacity (mAh)
b08 Total Capacity (mAh)
b09 Default Loader Status (%)
b10 Instant charge (%)
b11 Charging cycles (number)
Maximum time in which no char-
b12
ge was made (Hour)
b13 Time since last charge (Hour)
d00 Amount of battery cells (number)
d01 Cell Voltage 1 (mV)
d02 Cell Voltage 2 (mV)
dn Cell Voltage n (mV)
bSc Software version
bHc Hardware version
BF-UM-C-DP C13-EN November 2019
button to the
11
NOTE: If no data is detected, "--" is displayed.
Hardware version of battery
Software version of battery