BAFANG DP C13.CAN User Manual page 10

7.7.2.7 Sensor Software info
When the system is on, press and hold (>2S)
the and button at same time to
access the "Setting" interface, repetitively
press the button until the "SSc" (Sensor
Software check) appears on the display (as
shown below). And you can press and hold
(>2S) the and
to the main interface.
Once you have viewed your desired informa-
tion, press (<0.2S) the
next item "Sensor Hardware info".
7.7.2.8 Sensor Hardware info
When the system is on, press and hold (>2S)
the and button at same time to
access the "Setting" interface, repetitively
press the button until the "SHc" (Sensor
Hardware check) appears on the display (as
shown below). And you can press and hold
(>2S) the and
to the main interface.
Once you have viewed your desired informa-
tion, press (<0.2S) the
next item "Service Tip".
button together exit
button to enter
button together exit
button to enter
7.7.2.9 "Service Tip"
When the system is on, press and hold (>2S)
the and
cess the "Setting" interface, repetitively press
the button until the "nn A" appears on
the display (as shown below). And then
press or
0 means turn off the notification.
You can also press and hold (>2S) the
and button together exit to the main
interface.
Once you have chosen your desired selec-
tion, press (<0.2S) the
and to enter next item "Message of Error
Code".
7.7.2.10 Message of Error Code
When the system is on, press and hold (>2S)
the and
cess the "Setting" interface, repetitively press
the button until the "E0-00" appears
on the display (as shown below). And then
press or
Chose 0 means turn off the notification.
You can also press and hold (>2S) the
and button together exit to the main
interface.
Once you have viewed your desired selec-
tion, press (<0.2S) the
next item "Battery info".
10 BF-UM-C-DP C13-EN November 2019
button at same time to ac-
to select "0" or "1". Chose
button to save
button at same time to ac-
to view "E0-00" to "E9-00".
button to enter