Installing Tail Surfaces; Install The Stabs; Install The Vertical Fin - BVM GO FLY GOLD F-86 Sabre Assembly And Operating Manual

INSTALLING TAIL SURFACES

Install the Stabs

Connect the servo leads and secure
with servo clips or tape.
Insert the Carbon Rods fully into the
fuselage sockets.
Secure each stab by inserting the
2.5 mm bolts with a 2 mm wrench.

Install the vertical fin

Connect the servo leads and secure
with servo clips or tape.
Insert the Carbon Rods into the
receivers and install the 2.5 mm bolts
using a 2mm Allen wrench.
BVM ® 2020
F-86 Sabre
Assembly & Operation Manual
4