Installing Tail Surfaces; Install The Stabs; Install The Vertical Fin - BVM GO FLY GOLD F-100 SUPER SABRE Assembly And Operating Manual

INSTALLING TAIL SURFACES

Install the Stabs

.
Insert the Stabilator into the fuse
bracket.
Secure each Stabilator using the 3mm
bolts. A 2.5mm wrench will be used
here.

Install the vertical fin

Connect the servo leads and secure
with servo clips or tape.
Insert the Carbon Rods into the
receivers and secure with a 9/64
wrench.
BVM ® 2021
F-100 Super Sabre
Assembly & Operation Manual
th ball
5 07/2021