Set Clientsta Default-Key; Set Clientsta Distance; Set Clientsta Key - Alvarion BreezeACCESS-EZ Manual

5.9.3

set ClientSta default-key

This command selects the key number to use for encryption. The key indicated by
the default key selection must be configured with the same value in the AP and in
the SU-A-EZ in order for the link to work.
Syntax
set ClientSta default-key <1 | 2 | 3 | 4>
• The key may be a number between 1 and 4.
Default Setting
1
Command Mode
Installer, Admin
Example
Installer# set ClientSta default-key 2
Installer#
5.9.4

set ClientSta distance

This command allows the user to configure the estimated distance between the AP
and the farthest SU-A-EZ in the cell.
Syntax
set ClientSta distance <distance>
• distance - The distance between antennas in the range 1~50 km.
Default Setting
1 km
Command Mode
Installer, Admin
Example
Installer# set ClientSta distance 25
Installer#
5.9.5

set ClientSta key

This command defines hexadecimal WEP encryption keys on the SU-A-EZ. Up to
four keys may be entered.
Syntax
set ClientSta <key-1 | key-2 | key-3 | key-4> <hex>
• key-1 ~ key-4 - Selects the key number to use for encryption.
• hex - Enter keys as "0x" followed by 32 hexadecimal digits (0-9 and A-F) for 152 bit keys.
SU-A-EZ Manual
Wireless Commands
85