Chapter 5 - Command Line Interface
Default Setting
Null
Command Mode
Installer, Admin
Example
Installer# set ClientSta key-1
Installer#
5.9.6
set ClientSta linkrate
This command sets the maximum data rate at which the SU-A-EZ transmits
unicast packets on the wireless interface. The maximum transmission distance is
affected by the data rate. The lower the data rate, the longer the transmission
distance.
Syntax
set ClientSta linkrate <linkrate>
• linkrate - May be set to 6, 9, 12, 18, 24, 36, 48 or 54 Mbps.
Default Setting
54 Mbps
Command Mode
Installer, Admin
Example
Installer# set ClientSta linkrate 6
Installer#
5.9.7
set ClientSta mangVLAN
This command configures the management VLAN ID. The management VLAN is
for managing the SU-A-EZ. The data traffic is bridged transparently regardless of
this setting.
Syntax
set ClientSta mangVLAN <VLAN ID>
• VLAN ID - Range 0, or 1~4094. 0 implies that the management VLAN is disabled.
Default Setting
Disabled
86
0x12345678901234567890123456789012
Operation