General Commands; Exit; Ping - Alvarion BreezeACCESS-EZ Manual

Chapter 5 - Command Line Interface
5.3

General Commands

Command Function

exit

Logs out of the current session.

ping

Sends a ping signal to test for connectivity.
reboot Reboots the unit.
5.3.1 exit
The "exit" command allows you to log out of the current session.
Syntax
exit
Default Setting
None
Command Mode
Installer, Admin
Example
This example shows how to logout of the current session:
Installer#exit
ClientSta login:
5.3.2 ping
This command sends ICMP echo request packets to another node on the network.
Syntax
ping <ip_address>
• ip_address - IP address of the host.
Default Setting
None
Command Mode
Installer, Admin
Command Usage
• Use the ping command to see if another site on the network can be reached.
• The following are some results of the ping command:
60
Table 5-3: General Commands
Mode Page
60
Installer;
Admin
60
Installer;
Admin
62
Installer;
Admin
Operation